FZJ-5 Overturning machine
1. Introduction
H beam overturning machine has three pieces, and is controlled by one individual hydraulic station and electrical control box. This machine is used to turn H beam in 180° after two seams are welded, in order to weld another two seams.
2. Main parameters
● Overturning capacity: ≤5T
● Hydraulic station power: 15kw
● Hydraulic system working pressure: 16MPa
| ● Overturning capacity: | ≤5T |
| ● Hydraulic station power: | 15kw |
| ● Hydraulic system working pressure: | 16MPa |
3. Supply range
● Overturning frame: one set (3 pieces)
● Hydraulic system: hydraulic station, cylinder, and pipes
● Electrical system: electrical control box, electrical components
