WSHJ-1500 H beam horizontal welding machine
1. Introduction
Preceding welding machine focus the technology in mechanical, electric, hydraulic and pneumatic. First spot the end of H-beam, through single arc double wires submerged arc welding to form it H-beam.
2. Technical parameters
● Web height: 300-1500mm
● Web thickness: 5-16mm
● Flange width: 150-500mm
● Flange thickness: 5-32mm
● Welding speed: 0.3-1.9m/min (single arc twin wire)
● Beam length: 4000-15000mm
● Maximum beam weight: 4000kg
● Cross section drift angle: ≤8°
| ● Web height | 300-1500mm |
| ● Web thickness | 5-16mm |
| ● Flange width | 150-500mm |
| ● Flange thickness | 5-32mm |
| ● Beam length | 4000-15000mm |
| ● Maximum beam weight | 4000kg |
| ● Cross section drift angle | ≤8° |
3. Supply range
● Main machine: 1 set
● Conveying roller: 3.4m * 8pcs
● Assistant position device: 1 set, which is used for assist clamp the h beam during in feeding and welding
● Flux recycling system: 2 sets of flux recycling machine, recycling bin, flux hopper, conveying tube, valve and so on
● Welder source: 2 sets of USA Lincoln DC-1000 with NA3S controller and NA3 wire feeder, pipeline, wire, cable
● Hydraulic system: hydraulic station, hydraulic cylinder and oil tube
● Electric control system: electric control box, control panel
